Hotpoint washing machine AQM8D 49 U manual

The Hotpoint AQM8D 49 U is a freestanding washing machine with a 9 kg load capacity, 1400 rpm spin speed, energy rating A+++, and multiple wash programs. It features Hotpoint's AquaCare technology for reduced water consumption, Anti-Stain system for tough stains, Direct Spray for even detergent distribution, and a Delay Timer. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary selector and digital display, detergent drawer, drum, water inlet hoses, drain hose, adjustable feet, and power cord.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure seals are tight.
2. Position drain hose: Place into standpipe or sink; use U-bend hook if provided.
3. Level the machine: Adjust the four feet using a spanner until the machine is stable.
4. Plug into a grounded power outlet.

WARNING! Do not remove transit bolts before moving into final position. Ensure water connections are leak-free before first use.

First-Time Setup

After installation, run an empty wash cycle to clean the drum and remove any residues.

1. Power on the machine: Press the power button.
2. Select a program: Turn the rotary selector to "Drum Clean" or "Cotton 90°C".
3. Add detergent: Pour a small amount of detergent into compartment II.
4. Start the cycle: Press Start/Pause. Let the cycle complete.
5. Set preferences: Use the Settings button to configure beep volume, child lock, etc.

CAUTION! Ensure all transit bolts are removed. Do not skip the initial empty wash.

Specifications

• Model: Hotpoint AQM8D 49 U
• Capacity: 9 kg
• Spin Speed: 1400 rpm (adjustable)
• Energy Class: A+++
• Water Consumption: Approx. 45 litres per cycle (Eco 40-60)
• Noise Level: Washing: 53 dB; Spinning: 73 dB
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Weight: 70 kg
• Power Supply: 230-240 V, 50 Hz
• Programs: 16 programs including Cotton, Synthetic, Delicate, Wool, Quick Wash, Sport, etc.

Controls and Settings

Control Panel: Rotary program selector, digital display, Start/Pause button, Option buttons (Delay, Extra Rinse, etc.), Settings button.

Program Selection: Turn the knob to choose a wash program. The estimated time, temperature, and spin speed will display.

Options: Press relevant buttons to add functions: Pre-Wash, Extra Rinse, Anti-Stain, Delay Start, Reduced Creases, Speed Wash.

Settings Menu: Press and hold Settings to access: Child Lock (On/Off), End of Cycle Beep (Volume 0-3), Drum Clean reminder.

Detergent Drawer: Compartment I: Pre-wash; II: Main wash detergent/softener; *: Fabric softener.

Connecting Water & Drain

Water Inlet: Connect blue-marked hose to cold water; red-marked to hot (if available). Use only supplied hoses.

1. Ensure taps are off before connecting.
2. Screw hoses onto taps hand-tight, then a quarter turn with pliers.
3. Drain hose: Insert into standpipe (min. 60 cm height) or over sink edge. Secure with hook.
4. Check for leaks by turning taps on slowly.

Tip: Do not kink or bend hoses. Use a drain hose extension if needed.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not exceed 9 kg. Distribute evenly.
2. Add detergent: Use compartment II for liquid/powder. Add softener to * compartment.
3. Select program: e.g., Cotton for cottons, Synthetic for blends, Delicate for silk.
4. Adjust settings: Use option buttons to modify temperature, spin speed, etc.
5. Start: Press Start/Pause. The display shows remaining time.
6. At end: Door locks until "End" appears. Unload promptly to avoid creases.

WARNING! Do not open door during wash/spin. Check pockets for objects.

Special Functions

Anti-Stain: Select program, press Anti-Stain button. Machine pauses for pre-treatment of stains.

Delay Timer: Press Delay button repeatedly to set start time (1-24 hours).

Child Lock: Press and hold Settings, select Child Lock to disable controls.

Drum Clean: Run every 30 washes or when indicator lights. Use no detergent.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly: pull out, rinse under tap.

Clean drain pump filter periodically (located behind lower kickplate): Place towel, open cap, drain water, remove debris.

CAUTION! Do not use abrasive cleaners. Keep the door slightly ajar between washes to prevent odors.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation 2019/2014. Manufactured for the EU market. For support, visit www.hotpoint.eu or contact the Hotpoint service line in your country.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact Hotpoint authorized service. Keep model number ready.