Hotpoint washing machine AQD970D 49 EU / B manual

The Hotpoint AQD970D 49 EU / B is a 9 kg capacity freestanding washing machine with an A+++ energy rating, 1400 rpm spin speed, and multiple wash programs including Cotton, Synthetic, Delicates, Wool, and Quick Wash. It features Direct Spray technology for efficient washing, Anti-Stain removal options, a Delay Timer, and Child Lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9 kg drum, LED display, Program selector knob, Option buttons, Detergent drawer, Filter access, Power cord, Water inlet hoses, Drain hose.

Feature	Description
Direct Spray Technology	Sprays water directly onto laundry for better detergent dissolution and stain removal
Anti-Stain Programs	Targets specific stains like wine, grass, or grease
Delay Timer	Delays start of wash cycle up to 24 hours
Child Lock	Locks control panel to prevent accidental changes
Quick Wash	30-minute cycle for lightly soiled loads
Woolmark Blue certification	Safe washing of wool garments
LED Display	Shows remaining time, cycle stage, and options
Detergent Drawer	Compartments for pre-wash, main wash, and softener
Energy Rating	A+++ for high energy efficiency
Spin Speed	Up to 1400 rpm for reduced drying time

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure connections are tight.
Connect drain hose: Place hose into standpipe or sink, using hook if provided. Ensure no kinks.
Level the machine: Adjust feet using a spanner to ensure machine is stable and does not vibrate.
Plug into a grounded power outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are secure to prevent leaks.

First-Time Setup

After installation, run an initial maintenance wash.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use option buttons to select default spin speed, temperature if desired.
Test child lock: Press and hold relevant buttons to activate/deactivate.

CAUTION! Ensure all packaging and bolts are removed before first use to prevent damage.

Specifications

Capacity: 9 kg (cotton).
Energy Rating: A+++.
Spin Speed: Up to 1400 rpm.
Water Pressure: 0.5 - 8 bar (cold water supply).
Programs: Cotton, Synthetic, Delicates, Wool, Quick Wash, Anti-Stain, Rinse & Spin, Drain.
Dimensions (HxWxD): 85 x 60 x 60 cm approx.
Power Supply: 230-240V, 50Hz.
Noise Level: Washing: 56 dB; Spinning: 76 dB.
Weight: 70 kg approx.

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Option buttons (e.g., Extra Rinse, Pre-Wash, Delay), LED display.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic). LED shows default time/temp.

Options: Press relevant button to toggle functions (light indicates active). Common options: Temperature selection (cold to 90°C), Spin speed reduction (0-1400 rpm), Delay Start (1-24 hrs). Start/Pause: Press to begin cycle; press again to pause. Child Lock: Press and hold two buttons (e.g., Temp + Spin) for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if used). Drain: Place hose securely.

Ensure taps are off before connecting hoses.
Use only provided hoses; do not reuse old ones.
Drain hose must not be higher than 100 cm from floor.
After connections, turn on taps and check for leaks.

Tip: Use a drain hose extension if needed; ensure no siphoning occurs.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not overload; distribute evenly.
Add detergent: Use drawer compartments as per instructions.
Select program: Turn knob (e.g., Cotton for towels/bed linen).
Adjust options: Press buttons for temperature, spin, extra rinse, etc.
Start: Press Start/Pause; door locks and cycle begins.
Pause/change: Press Start/Pause to pause; door unlocks after a few seconds if safe.
End of cycle: Signal sounds; door unlocks. Remove laundry promptly.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

Anti-Stain: Select program for specific stains; follow on-garment care labels. Delay Start: Set delay for up to 24 hours. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled loads; uses pre-wash detergent compartment.

Care & Cleaning

Unplug before maintenance. Clean detergent drawer monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners on door seal or drum. Check and clean filter periodically.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulation. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock/door	Check plug; ensure child lock off; close door properly.
No water intake	Taps/hoses/filter	Ensure taps are on; check hoses for kinks; clean inlet filter.
Excessive vibration/noise	Transit bolts/leveling/load	Ensure transit bolts removed; level machine; redistribute load.
Water does not drain	Drain hose/filter	Check hose for kinks/blockage; clean pump filter.
Poor washing results	Detergent/load/program	Use correct detergent amount; do not overload; select suitable program.

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service; refer to warranty card.