Hotpoint washing machine AQD1072D 697 EU/A N manual

The Hotpoint AQD1072D 697 EU/A N is a freestanding washing machine with a 7 kg load capacity, energy class A+++, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay start, child lock, anti-crease function, and quick wash cycles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, detergent dispenser, drum light, filter access, adjustable feet, water inlet valves.

Feature	Description
Capacity	7 kg maximum load
Energy Rating	A+++ for high efficiency
Spin Speed	Up to 1400 RPM
Display	Digital LED with time remaining
Programs	15 programs including Cotton, Synthetics, Delicates, Quick Wash
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles after wash
Quick Wash	30-minute cycle for small loads
Noise Level	Less than 75 dB during spin

Installation

Unpack and remove transit bolts. Place on level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Level the machine: Adjust front feet using wrench; use spirit level.
Connect water supply: Attach inlet hoses to cold water tap (blue marker) and hot if needed (red marker).
Connect drain hose: Place in standpipe or sink; secure with hook.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in and run initial empty wash.

Open water taps fully.
Select Cotton program at 90°C.
Add 1/2 cup of detergent to drum (not dispenser).
Start cycle to clean drum and remove residues.
Set language: Press and hold Start/Pause for 3 seconds to toggle languages.

CAUTION! Ensure machine is level to prevent vibration and noise.

Specifications

Model: AQD1072D 697 EU/A N
Capacity: 7 kg
Energy Class: A+++
Spin Speed: 1400 RPM
Water Pressure: 0.5–10 bar
Programs: 15 including Eco, Wool, Sport, Mix
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 220–240 V, 50 Hz
Weight: 68 kg
Noise (wash/spin): 59/75 dB

Controls and Settings

Control Panel: Program selector knob, digital display, temperature button, spin speed button, option buttons (Delay, Extra Rinse, Pre-wash).

Buttons: Start/Pause, Power, Delay (1–24h), Child Lock (press 3 sec), Option buttons.

Programs: Cotton (40–90°C), Synthetics (40–60°C), Delicates (30°C), Quick Wash (30 min), Wool, Silk, Sport, Mix, Eco 40–60, Drum Clean, Rinse & Spin, Spin Only, Drain. Settings: Adjust temperature (cold to 90°C), spin speed (400–1400 RPM or no spin), options (Pre-wash, Extra Rinse, Anti-crease).

Connecting Water Supply

Use supplied hoses; connect to cold water (required) and hot water (optional).

Turn off taps before connecting.
Screw hoses onto machine inlet valves (blue=cold, red=hot).
Connect other ends to taps; ensure washers are fitted.
Open taps fully and check for leaks.
Place drain hose in standpipe (max height 100 cm) or over sink edge.

Tip: Do not kink hoses; replace if damaged.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 7 kg; distribute evenly.
Add detergent: Use dispenser compartments I (pre-wash), II (main wash), * (fabric softener).
Select program: Turn knob to desired program.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to pause; turn knob to change program (if not locked).
End of cycle: Machine beeps; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes; wait for cool-down.

Special Functions

Delay Start: Press Delay button to set start time (1–24h). Child Lock: Press and hold for 3 seconds to lock controls (indicator lights). Anti-Crease: Reduces wrinkles by tumbling periodically after cycle. Drum Clean: Run monthly with detergent to prevent odors.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly; remove and rinse under tap. Clean filter every 3 months: open flap at bottom front, place towel, unscrew filter cap, drain water, remove debris, reinsert. Clean drum with Drum Clean program.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

CE compliant; meets EU directives for safety and electromagnetic compatibility. Waste disposal: Follow local regulations; contact authorized service for disposal. Copyright © Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact 0 800 100 123 (toll-free).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power outlet; ensure child lock is off.
No water intake	Taps closed/hose kinked	Open taps fully; check hose for kinks; clean inlet filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level; redistribute load.
Water leaks	Hose connections	Tighten hose connections; check drain hose position; replace damaged hoses.
Poor washing results	Detergent/overload	Use correct detergent amount; reduce load size; select appropriate program.
Error codes (e.g., F01)	Various faults	Unplug for 5 minutes, restart; if persists, note code and call service.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0 800 100 123; www.hotpoint.eu