Hotpoint washing machine AQ96F 29 IT manual

The Hotpoint AQ96F 29 IT is a freestanding washing machine with a 9 kg load capacity, energy efficiency class A+++, 1400 RPM spin speed, and multiple wash programs. It features Hotpoint's AquaCare technology for reduced water consumption, a direct drive motor, a delay timer, child lock, and a digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, direct drive motor, water inlet valves, drain pump, and adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to cold water tap (and hot if using dual supply). Ensure washers are fitted.
3. Connect drain hose: Place into standpipe or sink; secure with hook if provided.
4. Level the machine: Adjust the four feet using a spanner until machine is stable.
5. Plug into a grounded power outlet.

WARNING! Do not install in areas subject to freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a cotton cycle at 90°C without laundry to clean the drum.

1. Power on: Press the power button.
2. Load detergent: Add powder/liquid to the appropriate dispenser drawer compartments.
3. Select program: Turn the program selector to the desired wash cycle.
4. Adjust options: Use the option buttons for extra rinse, pre-wash, or delay start.
5. Start cycle: Press the start/pause button.

CAUTION! Ensure the door is properly closed before starting. Overloading can affect wash performance.

Specifications

• Model: Hotpoint AQ96F 29 IT
• Capacity: 9 kg
• Energy Rating: A+++
• Annual Energy Consumption: 175 kWh
• Water Consumption: Approx. 10,000 litres per year
• Spin Speed: 1400 RPM (adjustable)
• Noise Level (Wash/Spin): 56/76 dB(A)
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Weight: 70 kg
• Mains Supply: 230-240V ~ 50Hz
• Max Power: 2200 W
• Programs: 16, including Eco 40-60, Cotton, Synthetic, Delicates, Wool, Quick 15'

Controls and Settings

Control Panel: Power button, Program selector knob, Digital display, Option buttons (e.g., Extra Rinse, Pre-Wash, Delay Start), Start/Pause button, Spin Speed button, Temperature button.

Program Selector: Turn to choose from 16 programs (Cotton, Synthetic, Delicate, Wool, Quick Wash, Eco 40-60, etc.). Option Buttons: Customise cycle with extra rinse, pre-wash, or delay timer (1-24 hrs). Spin Speed: Adjust or cancel spin. Temperature: Select wash temperature (Cold to 90°C). Child Lock: Press and hold specific buttons to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Hose to standpipe (min 60 cm height) or sink.

1. Ensure taps are off before connecting hoses.
2. Use only the supplied hoses; do not reuse old ones.
3. Drain hose must not be kinked or submerged.
4. After connection, open taps fully and check for leaks.

Tip: A non-return valve or standpipe is recommended to prevent siphoning.

Using Wash Programs

Select program based on fabric type and soil level.

1. Sort laundry: Separate by colour and fabric type.
2. Load machine: Do not exceed 9 kg; distribute evenly.
3. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
4. Select program: Turn knob (e.g., Cotton for cottons, Synthetic for blends).
5. Adjust settings: Set temperature, spin speed, and options.
6. Start: Press Start/Pause. The door locks and cycle begins.
7. End of cycle: A signal sounds. Door unlocks after a short delay. Remove laundry promptly.

WARNING! Do not open door during wash or spin. Wait for door lock symbol to disappear.

Special Functions

Delay Start: Set 1-24 hour delay. Child Lock: Press Temp + Spin buttons for 3 sec. Drum Clean: Run empty at 90°C with detergent monthly. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: For heavily soiled items.

Care & Cleaning

Unplug before maintenance. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass to remove lint. Run drum clean cycle monthly. Check and clean pump filter if draining is slow.

CAUTION! Do not use abrasive cleaners or solvents. Empty pockets to avoid damaging drum.

Regulatory Information

CE marked. Complies with EU directives for safety (LVD) and electromagnetic compatibility (EMC). This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). Do not dispose with household waste. For disposal information, contact local authorities. Manufacturer: Hotpoint, a Haier company. For support, visit www.hotpoint.eu or contact local service centre.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorised Hotpoint service. Do not attempt repairs yourself.