Hotpoint washing machine AQ86F 29 IT manual

The Hotpoint AQ86F 29 IT is a freestanding washing machine with a 9kg capacity, 1400 RPM spin speed, and energy efficiency class A. It features multiple wash programs, a digital display, delay start, child lock, and anti-flood protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door with safety lock, water inlet hoses, drain hose, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 RPM
Energy Class	A (Energy efficient)
Programs	15 wash programs including Cotton, Synthetic, Delicate, Quick Wash
Display	Digital display with time remaining and cycle indicators
Delay Start	Up to 24 hours delay timer
Child Lock	Prevents accidental program changes
Anti-Flood	Automatic water shut-off in case of leak detection
Door Lock	Safety lock during operation
Adjustable Feet	For leveling on uneven floors

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove transit bolts: Use spanner to remove bolts from rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (blue) and hot water tap (red) if applicable.
Connect drain hose: Place in sink or secure to drain pipe.
Level the machine: Adjust feet using wrench; ensure machine is stable.
Plug into AC power.

WARNING! Do not install in areas with freezing temperatures or direct sunlight. Ensure all connections are secure.

First-Time Setup

Plug in and power on machine; follow initial setup.

Run first wash: Select Cotton program at 90°C without laundry to clean drum.
Set language: Press and hold Settings button for 3 seconds to select language.
Adjust settings: Use control dial to select desired wash programs.
Test child lock: Press and hold Child Lock button for 3 seconds to activate.

CAUTION! Ensure machine is level to prevent vibration and noise during spin cycle.

Specifications

Model: Hotpoint AQ86F 29 IT
Capacity: 9 kg
Spin Speed: 1400 RPM
Energy Rating: A
Water Pressure: 0.5 - 8 bar
Programs: 15 including Eco, Cotton, Synthetic, Delicate, Wool, Quick Wash
Dimensions (HxWxD): 85 x 60 x 60 cm
Power Supply: 230V AC, 50Hz
Noise Level: 53 dB (washing), 73 dB (spinning)

Controls and Settings

Access settings via control panel. Buttons: POWER, START/PAUSE, CHILD LOCK, DELAY START, RAPID WASH.

Control Dial: Select wash programs (Cotton, Synthetic, Delicate, Wool, etc.). Display: Shows time remaining, cycle stage, and selected options.

Settings: Temperature selection (cold to 90°C), spin speed (0-1400 RPM), extra rinse, pre-wash. Delay Start: Set delay up to 24 hours. Child Lock: Press and hold for 3 seconds to lock/unlock controls.

Connecting Water Supply

Water inlet: Blue hose for cold water, red hose for hot water (if used). Drain: Hose to sink or drain pipe.

Turn off water taps before connecting hoses.
Connect hoses to machine and taps; tighten securely.
Place drain hose in sink or secure to drain pipe (max height 100 cm).
Open water taps fully.

Tip: Check for leaks after first connection; ensure hoses are not kinked.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Open door, load clothes evenly, close door securely.
Add detergent: Pour into drawer compartments (main wash, pre-wash, softener).
Select program: Turn dial to desired program (e.g., Cotton, Synthetic).
Adjust settings: Select temperature, spin speed, extra options.
Start: Press START/PAUSE; door locks automatically.
Pause: Press START/PAUSE to pause; door unlocks after 2 minutes if safe.
End of cycle: Machine beeps; door unlocks; remove laundry promptly.

WARNING! Do not overload drum; balance load to prevent vibration. Use recommended detergent amounts.

Maintenance & Cleaning

Unplug before cleaning. Clean detergent drawer monthly; run drum clean program every 30 cycles.

Detergent drawer: Remove and rinse under warm water.
Drum: Run empty wash at 90°C with drum cleaner or vinegar.
Door seal: Wipe with damp cloth; remove debris.
Filter: Clean drain filter every 3 months (located behind lower panel).

CAUTION! Do not use abrasive cleaners; keep area dry to prevent electrical hazards.

Safety Features

Child Lock: Locks control panel. Door Lock: Auto-locks during operation. Anti-Flood: Shuts off water if leak detected. Overheat Protection: Prevents motor overheating.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Copyright © 2025 Hotpoint; trademarks of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact customer service at +39 0353 7391.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power/child lock	Check plug; ensure child lock is off; close door properly.
No water intake	Taps/hoses	Ensure taps are open; check hose for kinks; clean inlet filter.
Excessive vibration	Level/load	Adjust feet; redistribute laundry; remove transit bolts.
Water not draining	Drain hose/filter	Check hose for blockages; clean drain filter.
Error codes on display	Various faults	Refer to manual error code list; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset electronic control.

Service: +39 0353 7391; www.hotpoint.eu