Hotpoint washing machine AQ83F 29 FR manual

The Hotpoint AQ83F 29 FR is a freestanding washing machine with a 9kg capacity, 1400 RPM spin speed, and an A+++ energy rating. It features Hotpoint's AquaCare technology for fabric care, multiple wash programs including a 15-minute fast wash, direct injection motor, delay timer, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with rotary selector and digital display, detergent dispenser, drum with stainless steel interior, water inlet valves, drain pump filter, and adjustable feet.

Feature	Description
Capacity	9 kg maximum load
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
AquaCare Technology	Gentle washing action to protect fabrics
Direct Injection Motor	Quiet and efficient operation
15-Minute Fast Wash	Quick cycle for lightly soiled items
Delay Timer	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Detergent Dispenser	Compartments for pre-wash, main wash, and softener
Display	Shows remaining time, cycle stage, and options

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

Connect water supply: Attach inlet hoses to hot and/or cold taps (check supplied connectors).
Connect drain hose: Place into standpipe or sink (minimum height 60cm, maximum 100cm).
Level the machine: Adjust the four feet using a spanner to ensure stability.
Plug into a grounded 220-240V AC power outlet.

WARNING! Do not install in areas subject to freezing temperatures. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on the machine: Press the power button.
Run a cleaning cycle: Select the "Drum Clean" or "Maintenance" program without laundry.
Set preferences: Use the settings button to adjust buzzer volume, default temperature, etc.
Load laundry: Do not exceed the 9kg maximum. Mix large and small items for balance.

CAUTION! Ensure the machine is level to prevent excessive vibration during spin.

Specifications

Model: Hotpoint AQ83F 29 FR
Capacity: 9 kg
Spin Speed: 1400 RPM (adjustable)
Energy Class: A+++
Water Consumption: Approx. 52 litres per cycle (cotton 60°C)
Noise Level: Washing: 53 dB; Spinning: 73 dB
Dimensions (HxWxD): 85 x 60 x 60 cm
Programs: Cotton, Synthetics, Delicates, Wool, Fast 15', Sport, Jeans, Drum Clean
Special Features: AquaCare, Delay Start, Child Lock, Extra Rinse, Pre-wash
Power Supply: 220-240V AC, 50Hz

Controls and Settings

Access functions via the rotary selector and touch buttons. Control Panel: POWER, START/PAUSE, OPTIONS (e.g., Extra Rinse, Pre-wash), CHILD LOCK.

Rotary Selector: Turn to choose wash programs (Cotton, Synthetics, etc.). Display: Shows time, temperature, spin speed, and active options.

Settings Menu: Press and hold OPTIONS to enter settings for buzzer, default temperature, end-of-cycle signal. AquaCare: Automatically adjusts water levels for fabric care. Delay Timer: Set start delay from 1 to 24 hours.

Connecting Water & Drain

Water Inlet: Two hoses for hot and cold (red/blue markings). Drain: Flexible hose for outlet.

Ensure water taps are off before connecting hoses.
Connect inlet hoses to machine and taps, tightening by hand then a quarter turn with pliers.
Secure drain hose to standpipe or sink edge (use supplied hook if needed).
Fully open water taps and check for leaks.

Tip: Use only the supplied hoses. Do not extend drain hose beyond 1.5 meters.

Using Wash Programs

Supports various fabrics and soil levels.

Select program: Turn rotary dial (e.g., Cotton for towels/bedding).
Adjust options: Press OPTIONS to add Pre-wash, Extra Rinse, etc.
Set temperature/spin: Use +/- buttons if program allows adjustment.
Add detergent: Pour into correct dispenser compartments.
Close door and press START/PAUSE.
Pause/change: Press START/PAUSE to stop; door locks during wash.
End of cycle: Buzzer sounds; door unlocks after a short delay.

WARNING! Do not open detergent dispenser during operation. Remove items promptly after cycle to prevent wrinkles.

Special Functions

Child Lock: Press and hold CHILD LOCK for 3 seconds to disable controls. Delay Start: Set delayed start time before pressing START. AquaCare: Automatically active on most programs for optimal water usage and fabric care.

Care & Cleaning

Unplug before maintenance. Clean detergent dispenser monthly; run drum clean program every 30 cycles. Check and clean drain pump filter periodically.

CAUTION! Do not use abrasive cleaners or solvents on the exterior. Keep the door slightly ajar between washes to prevent odors.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured under ISO 9001 quality standards. Copyright © Hotpoint, a trademark of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact the local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug and power; ensure door is firmly closed.
No water intake	Taps/hoses/filter	Ensure taps are open; check hoses for kinks; clean inlet filter.
Excessive vibration/noise	Transit bolts/leveling/load	Verify transit bolts removed; re-level machine; redistribute load.
Water not draining	Drain hose/pump filter	Check hose for blockages/kinks; clean pump filter.
Error code on display	Various faults	Consult manual error code list; unplug for 1 minute then retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Hotpoint service; www.hotpoint.eu