Hotpoint washing machine AQ83D 29 EU/B manual

The Hotpoint AQ83D 29 EU/B is a freestanding washing machine with an 8 kg load capacity, energy efficiency class A, 1400 RPM spin speed, and multiple wash programs. It features a digital display, delay timer, child lock, and various specialized cycles for different fabrics. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door, water inlet valves, drain pump filter, and adjustable feet.

FeatureDescription
Capacity8 kg (dry laundry)
Spin SpeedUp to 1400 RPM
Energy ClassA (Energy Label)
DisplayDigital with time remaining indicator
Programs15+ programs including Cotton, Synthetic, Delicate, Quick Wash
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Door LockAutomatic during operation
Detergent DrawerCompartments for pre-wash, main wash, softener
Adjustable FeetFor leveling the appliance

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hose to cold water tap (3/4" thread). Ensure washers are fitted.
  3. Connect drain hose: Place into standpipe or sink; secure with U-bend if required.
  4. Level the machine: Adjust front feet using a spanner; use spirit level to check.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or extreme heat. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a cotton cycle at 90°C without laundry to clean the drum.

  1. Power on: Press POWER button.
  2. Select program: Turn program selector to "Cotton 90°C".
  3. Add detergent: Pour 100 ml of detergent into main wash compartment (II).
  4. Start: Press START/PAUSE. The cycle will run for approximately 2 hours.
  5. After completion, the machine is ready for normal use.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Controls and Settings

Control Panel: POWER button, Program selector knob, Display, Temperature button, Spin speed button, Delay Start button, Option buttons (e.g., Extra Rinse, Pre-wash), START/PAUSE button.

Display Icons: Time remaining, Child Lock, Door Lock, Delay Start, Temperature, Spin Speed, Option indicators.

Program Selection: Turn knob to desired program. Temperature: Press TEMP to cycle through available temperatures (Cold, 20°C, 30°C, 40°C, 60°C, 90°C). Spin Speed: Press SPIN to adjust or select "No Spin". Delay Start: Press DELAY to set start time (1-24 hours). Options: Select Extra Rinse, Pre-wash, etc., as needed. Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold water only (hose supplied). Drain: Hose can be placed in sink or standpipe (max height 100 cm).

  1. Ensure water tap is off before connecting hose.
  2. Screw inlet hose to tap; hand-tighten, then a quarter turn with pliers.
  3. Connect other end to machine (rear left); tighten by hand.
  4. Place drain hose into standpipe (min diameter 4 cm) or over sink edge; secure with hook if provided.
  5. Open water tap fully and check for leaks.

Tip: Do not kink or crush hoses. Ensure drain hose is not submerged to prevent siphoning.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Open door, load items loosely (do not overload).
  2. Add detergent: Pull drawer, add detergent/softener to correct compartments.
  3. Select program: Turn knob (e.g., Cotton for cottons, Synthetic for blends).
  4. Adjust settings: Set temperature, spin speed, and options if needed.
  5. Start: Press START/PAUSE. Door locks and cycle begins.
  6. After wash: "End" appears on display. Door unlocks after a few minutes. Remove laundry promptly.

WARNING! Do not open door during wash; wait for door lock symbol to disappear. Remove all objects from pockets.

Special Functions

Delay Start: Set wash to begin later (1-24 hours). Child Lock: Locks controls (press and hold for 3 sec). Extra Rinse: Adds an additional rinse cycle. Pre-wash: For heavily soiled items; uses compartment I. Drum Clean: Run monthly without laundry at 90°C to clean drum.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly: Pull out, rinse under tap. Clean drain pump filter every 2-3 months: Open flap at bottom front, place container, unscrew filter, remove debris, reinsert.

CAUTION! Do not use abrasive cleaners. Keep area around machine dry.

Regulatory Information

CE marked. Complies with EU directives for safety (EN 60335-1, EN 60335-2-7) and electromagnetic compatibility (EN 55014-1, EN 55014-2). Manufacturer: Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine does not startPower/DoorCheck plug, power outlet; ensure door is closed properly.
No water intakeTap/hoseEnsure tap is on; check hose for kinks; clean inlet filter.
Water does not drainDrain filter/hoseClean drain pump filter; check drain hose for blockages/kinks.
Excessive vibration/noiseTransit bolts/levelingEnsure transit bolts removed; re-level the machine; redistribute load.
Display shows error codeFaultConsult manual for code meaning (e.g., F01: water inlet fault).
Detergent not dispensedDrawer blockedClean detergent drawer compartments; use correct detergent type.

Reset: Unplug for 1 minute, then restart.

Service: Contact authorized Hotpoint service center. Keep model number ready.

Hotpoint washing machine AQ83D 29 EU/B manual © - All Rights Reserved 2025