Hotpoint washing machine AQ113F497E manual

The Hotpoint AQ113F497E is a freestanding washing machine with a 13kg capacity, featuring a 1400 RPM spin speed, A+++ energy rating, and multiple wash programs including Eco 40-60, Cotton, Synthetics, Delicates, Wool, and Quick Wash. It includes Hotpoint's Anti-Stain technology, Direct Spray for even detergent distribution, and a delay timer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Large LED display, Program selector knob, Start/Pause button, Delay timer button, Option buttons (e.g., Extra Rinse, Anti-Crease), Detergent drawer, Filter access, Adjustable feet.

Installation

Unpack and remove all transit bolts and packaging. Place on a solid, level floor.

1. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable). Ensure washers are fitted.
2. Connect drain hose: Place hose into standpipe or sink, secure with provided hook if needed.
3. Level the machine: Adjust the feet using a spanner until the machine is stable and does not rock.
4. Plug into a grounded power outlet.

WARNING! Do not remove transit bolts before moving the machine into position. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

1. Remove any remaining packaging from inside the drum.
2. Connect power and water, then turn on the water tap.
3. Open the detergent drawer and pour 100ml of white vinegar or a washing machine cleaner into the main wash compartment.
4. Select the "Cotton" program at 90°C without laundry and run a full cycle.
5. After completion, the machine is ready for normal use.

CAUTION! Ensure the machine is level to prevent excessive vibration and noise during spin cycles.

Specifications

• Model: AQ113F497E
• Type: Freestanding Front Loader
• Capacity: 13 kg
• Max Spin Speed: 1400 RPM
• Energy Rating: A+++
• Water Pressure: 0.5 - 10 bar
• Programs: Eco 40-60, Cotton, Synthetics, Delicates, Wool, Quick Wash, Sportswear, Jeans, Anti-Allergy, Rinse & Spin, Drain.
• Dimensions (HxWxD): 85 x 60 x 60 cm
• Power Supply: 220-240V, 50Hz

Controls and Settings

Access functions via the control panel. Main Controls: Program selector knob, Start/Pause button, Delay timer button, Option buttons.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetics). LED display shows default time and temperature.

Option Buttons: Press to toggle functions like Extra Rinse, Anti-Crease, Pre-Wash, or to adjust Spin Speed and Temperature.

Delay Timer: Press to set start delay in hours (up to 24h).

Child Lock: Press and hold Start/Pause and Delay Timer for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to cold (mandatory) and hot (optional) taps. Drain: Secure hose to standpipe or sink.

1. Ensure water taps are off before connecting hoses.
2. Use only the provided hoses; do not reuse old ones.
3. The drain hose should be between 60-100 cm high to prevent siphoning.
4. After connections, turn on taps and check for leaks.

Tip: Leave a small gap between the drain hose and the bottom of the standpipe to prevent backflow.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Open door, load items loosely, do not overload.
2. Add detergent: Pour into correct compartment of the drawer (I: Pre-wash, II: Main wash, *: Softener).
3. Select program: Turn knob (e.g., "Cotton" for cottons and linens).
4. Adjust options: Press buttons to modify temperature, spin speed, or add Extra Rinse.
5. Start: Press Start/Pause. The door locks and the cycle begins.
6. At end of cycle: "End" appears on display. Wait for door lock symbol to go off before opening.

WARNING! Do not open the door during a wash or spin cycle. Wait until the drum has completely stopped.

Special Functions

Anti-Stain: Automatically adjusts time, temperature, and rinses for selected stain types (e.g., grass, wine). Direct Spray: Ensures detergent is fully dissolved before contacting clothes. Delay Timer: Program to start later. Child Lock: Locks control panel.

Care & Cleaning

Unplug before maintenance. Monthly: Clean detergent drawer and rubber door seal. Every 2 months: Run maintenance wash (90°C Cotton program without laundry). Periodically: Check and clean the pump filter.

CAUTION! Never use abrasive cleaners or solvents on the machine surface or door glass.

Regulatory Information

Complies with EU Ecodesign and Energy Labeling regulations. Manufactured under ISO 9001 quality standards. For product support, registration, and warranty, visit www.hotpoint.eu or contact the Hotpoint helpline in your country. Disposal: At end of life, dispose of according to local WEEE regulations.

Troubleshooting

Reset: Unplug machine for 5 minutes, then plug back in.

Service: Contact Hotpoint authorized service. Find your local number at www.hotpoint.eu/service.