The Hotpoint AQ113DA 697 EU/A is a freestanding washing machine with a 13 kg load capacity, featuring a high energy efficiency rating (A+++), multiple wash programs, a digital display, delay timer, child lock, and anti-flood protection. It includes a direct injection motor, variable spin speeds up to 1400 rpm, and options for quick wash, eco wash, and specialty fabric cycles. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.
Key components: Control panel with digital display, detergent drawer, drum, door with safety lock, water inlet hoses, drain hose, adjustable feet, and power cord.
| Feature | Description |
|---|---|
| Load Capacity | 13 kg for large laundry loads |
| Energy Rating | A+++ for high energy efficiency |
| Spin Speed | Variable up to 1400 rpm |
| Wash Programs | Multiple programs including Cotton, Synthetic, Delicate, Quick Wash |
| Digital Display | Shows program time, cycle stage, and settings |
| Delay Timer | Delay start up to 24 hours |
| Child Lock | Prevents accidental program changes |
| Anti-Flood Protection | Automatic water shut-off in case of leaks |
| Direct Injection Motor | Quiet and efficient operation |
| Detergent Drawer | Compartments for pre-wash, main wash, and fabric softener |
Unpack and inspect contents. Place on a level, stable floor.
WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.
Plug in and power on the washing machine; follow initial setup steps.
CAUTION! Ensure transit bolts are removed before first use to prevent damage.
Control Panel: Power button, program knob, digital display, temperature button, spin speed button, delay start button, option buttons (e.g., extra rinse, pre-wash), and START/PAUSE.
Program Selection: Turn knob to choose cycle (Cotton, Synthetic, etc.). Temperature: Press TEMP to select (cold, 30°C, 40°C, 60°C, 90°C). Spin Speed: Press SPIN to adjust (Rinse Hold, 400, 600, 800, 1000, 1200, 1400 rpm). Options: Select extra rinse, pre-wash, or eco mode as needed. Delay Start: Press DELAY to set start time (1-24 hours). Child Lock: Press and hold specific buttons (e.g., TEMP + SPIN) for 3 seconds to activate/deactivate.
Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual supply). Drain: Place hose in standpipe (max height 100 cm) or over sink edge.
Tip: Use a drain hose extension if needed; do not submerge hose in water.
Supports various fabrics and soil levels.
WARNING! Do not open door during high-temperature washes; wait for unlock signal.
Delay Start: Set to start later (e.g., during off-peak hours). Child Lock: Prevents accidental changes. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled loads. Eco Mode: Reduces energy and water for partial loads. Quick Wash: 30-minute cycle for lightly soiled items.
Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean cycle every 30 washes.
CAUTION! Do not use abrasive cleaners; keep control panel dry. Clean drain pump filter periodically to remove debris.
CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Manufactured by Hotpoint, a brand of Whirlpool Corporation. For support, visit www.hotpoint.eu or contact local service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine does not start | Power/door | Check plug and power; ensure door is closed properly. |
| No water intake | Taps/hoses/filter | Open taps; check hoses for kinks; clean inlet filter. |
| Water does not drain | Drain hose/pump filter | Check hose for blockages; clean pump filter. |
| Excessive vibration/noise | Transit bolts/leveling | Ensure transit bolts removed; adjust feet to level machine. |
| Detergent not dispensing | Drawer clogged | Clean detergent drawer compartments. |
| Error codes on display | Various faults | Consult manual for specific code (e.g., E01, E02); reset by unplugging for 1 minute. |
Reset: Unplug for 1 minute, then restart.
Service: Contact authorized Hotpoint service; www.hotpoint.eu